Effect of Covalence and Degree of Cation Order on the Luminous Efficacy of Mn4+ Luminescence in the Double Perovskites, Ba2BTaO6 (B = Y, Lu, Sc).

The spectroscopic properties of the Mn4+ ion are investigated in the series of isostructural double perovskite compounds, Ba2BTaO6 (B = Y, Lu, Sc). A comparison of these properties highlights the influence of covalent bonding within the perovskite framework and the degree of order between the B3+-Ta cations on the energy and intensity of the Mn4+2E → 4A2 emission transition (R-line). These two parameters of the emission spectrum are of importance for practical application since they determine the phosphor luminous efficacy. The influence of covalent bonding within the corner shared BO6/2 and TaO6/2 perovskite framework on the energy of the R-line energy is investigated. From the spectroscopic data, we have derived information on the influence of the degree of order between the B3+ and Ta5+ cations on the intensity of the R-line. The lowest energy and the highest intensity of the R-line are found in the double perovskite, Ba2ScTaO6. The purpose of this work is to propose for first time an explanation of these effects in the considered double perovskites. The obtained results are useful guidelines for practical improvement and tuning of key parameters of phosphors to the desired values.

Unraveling Broadband Near-Infrared Luminescence in Cr3+-Doped Ca3Y2Ge3O12 Garnets: Insights from First-Principles Analysis.

In this study, we conducted an extensive investigation into broadband near-infrared luminescence of Cr3+-doped Ca3Y2Ge3O12 garnet, employing first-principles calculations within the density functional theory framework. Our initial focus involved determining the site occupancy of Cr3+ activator ions, which revealed a pronounced preference for the Y3+ sites over the Ca2+ and Ge4+ sites, as evidenced by the formation energy calculations. Subsequently, the geometric structures of the excited states 2E and 4T2, along with their optical transition energies relative to the ground state 4A2 in Ca3Y2Ge3O12:Cr3+, were successfully modeled using the ΔSCF method. Calculation convergence challenges were effectively addressed through the proposed fractional particle occupancy schemes. The constructed host-referred binding energy diagram provided a clear description of the luminescence kinetics process in the garnet, which explained the high quantum efficiency of emission. Furthermore, the accurate prediction of thermal excitation energy yielded insights into the thermal stability of the compound, as illustrated in the calculated configuration coordinate diagram. More importantly, all calculated data were consistently aligned with the experimental results. This research not only advances our understanding of the intricate interplay between geometric and electronic structures, optical properties, and thermal behavior in Cr3+-doped garnets but also lays the groundwork for future breakthroughs in the high-throughput design and optimization of luminescent performance and thermal stability in Cr3+-doped phosphors.

Frontiers of Deep-Red Emission of Mn4+ Ions with Ruddlesden-Popper Perovskites.

It is well-known that the chemical composition of the host material significantly affects the spectroscopic performance of transition metal ions. However, it is worth noting that also the structure and symmetry of crystallographic sites play significant roles in transition metal ion luminescence. In this study, we demonstrate three perovskite structures of strontium titanate forming so-called Ruddlesden-Popper phases doped with Mn4+ ions. The observed reduction in the average Ti4+-O2- distance in the series SrTiO3-Sr2TiO4-Sr3Ti2O7 allowed for a record-breaking shift in the spectral position of Mn4+ emission band with a maximum of around 734 nm and led to an improvement of the already impressive thermometric performance of SrTiO3:Mn4+ in ratiometric and lifetime-based approaches. This research encourages a further search for structures that, with the help of the developed correlations between structural and optical properties, could lead to the discovery of phosphors beyond the limits established so far.

Isolated Coordination Polyhedron Confinement in ABP2O7:Mn2+ (A = Ba/Sr; B = Mg/Zn).

Many research efforts have focused on designing new inorganic phosphors to meet different application requirements. The structure-photoluminescence relationship between activator ions and the matrix lattice plays an irreparable role in designing target phosphors. Herein, a series of ABP2O7:Mn2+ (A = Ba/Sr; B = Mg/Zn) phosphors are prepared for a detailed study on the relationship between the luminescence performance and spatial structure and symmetry of the doping site of Mn2+. Due to the weak interaction between nearest B-B pairs, [BO5] is defined as an isolated coordination polyhedron whose structure and symmetry directly influence the photoluminescence of Mn2+. The emission wavelength of Mn2+ is ∼620 nm when it occupies the triangular bipyramid [MgO5] in BaMgP2O7. When Mn2+ occupies the quadrangular pyramid-typed [MgO5] or [ZnO5] in SrMgP2O7, SrZnP2O7, and BaZnP2O7, the emission wavelengths peak at ∼670 nm. We propose a conception of isolated coordination polyhedral confinement to clarify the luminescence performance of Mn2+ in the fivefold coordination configuration with different geometries, which has great theoretical research significance for designing inorganic phosphors.

Electronic, Optical, and Vibrational Properties of an AgAlS2 Crystal in a High-Pressure Phase.

The aim of this study is to comprehensively examine the structural composition and properties of the AgAlS2 crystal during its high-pressure phase. This analysis delves into the second coordination environment of the crystal structure and elucidates the distinct transformations it undergoes during the phase transition. The band energy structure was calculated, and the origin of electronic levels was clarified. It is shown that the crystal becomes non-stratified during the phase transition. This study also determined the values of the crystal's carrier effective masses, underscoring its spatial anisotropy. It was found that the calculated optical functions are similar to the crystal in the chalcopyrite structure, and their differences are shown. Further, this study involved the calculation of the crystal's phonon spectrum, revealing the spectrum's transformation during the phase transition. The vibrational frequencies were also obtained, with a symmetrical classification of vibrational modes. Finally, this study derived the infrared and Raman spectra of the AgAlS2 crystal, thereby providing a comprehensive picture of the crystal during its high-pressure phase.

Study on Local-Structure Symmetrization of K2XF6 Crystals Doped with Mn4+ Ions by First-Principles Calculations.

The crystals of Mn4+-activated fluorides, such as those of the hexafluorometallate family, are widely known for their luminescence properties. The most commonly reported red phosphors are A2XF6: Mn4+ and BXF6: Mn4+ fluorides, where A represents alkali metal ions such as Li, Na, K, Rb, Cs; X=Ti, Si, Ge, Zr, Sn, B = Ba and Zn; and X = Si, Ge, Zr, Sn, and Ti. Their performance is heavily influenced by the local structure around dopant ions. Many well-known research organizations have focused their attention on this area in recent years. However, there has been no report on the effect of local structural symmetrization on the luminescence properties of red phosphors. The purpose of this research was to investigate the effect of local structural symmetrization on the polytypes of K2XF6 crystals, namely Oh-K2MnF6, C3v-K2MnF6, Oh-K2SiF6, C3v-K2SiF6, D3d-K2GeF6, and C3v-K2GeF6. These crystal formations yielded seven-atom model clusters. Discrete Variational Xα (DV-Xα) and Discrete Variational Multi Electron (DVME) were the first principles methods used to compute the Molecular orbital energies, multiplet energy levels, and Coulomb integrals of these compounds. The multiplet energies of Mn4+ doped K2XF6 crystals were qualitatively reproduced by taking lattice relaxation, Configuration Dependent Correction (CDC), and Correlation Correction (CC) into account. The 4A2g→4T2g (4F) and 4A2g→4T1g (4F) energies increased when the Mn-F bond length decreased, but the 2Eg → 4A2g energy decreased. Because of the low symmetry, the magnitude of the Coulomb integral became smaller. As a result, the decreasing trend in the R-line energy could be attributed to a decreased electron-electron repulsion.

Cation-defect-induced self-reduction towards efficient mechanoluminescence in Mn2+-activated perovskites.

Mechanoluminescent (ML) materials have shown promising prospects for various applications, e.g. in stress sensing, information anti-counterfeiting and bio stress imaging fields. However, the development of trap-controlled ML materials is still limited, because the trap formation mechanism is not always clear. Here, inspired by a defect-induced Mn4+ → Mn2+ self-reduction process in suitable host crystal structures, a cation vacancy model is creatively proposed to determine the potential trap-controlled ML mechanism. Combined with the theoretical prediction and experimental results, both the self-reduction process and ML mechanism are clarified in detail, where the contribution of and defects dominates the ML luminescent process. Electrons/holes are mainly captured by the anionic/cationic defects, followed by the combination of electrons and holes to transfer energy to the Mn2+ 3d states under mechanical stimuli. Based on the multi-mode luminescent features excited by X-ray, 980 nm laser and 254 nm UV lamp, together with the excellent persistent luminescence and ML, a potential application in advanced anti-counterfeiting is demonstrated. These results will deepen the understanding of the defect-controlled ML mechanism, and inspire more defect-engineering strategies to develop more high-performance ML phosphors for practical application.

Mn5+-activated Ca6Ba(PO4)4O near-infrared phosphor and its application in luminescence thermometry.

The near-infrared luminescence of Ca6Ba(PO4)4O:Mn5+ is demonstrated and explained. When excited into the broad and strong absorption band that spans the 500-1000 nm spectral range, this phosphor provides an ultranarrow (FWHM = 5 nm) emission centered at 1140 nm that originates from a spin-forbidden 1E → 3A2 transition with a 37.5% internal quantum efficiency and an excited-state lifetime of about 350 µs. We derived the crystal field and Racah parameters and calculated the appropriate Tanabe-Sugano diagram for this phosphor. We found that 1E emission quenches due to the thermally-assisted cross-over with the 3T2 state and that the relatively high Debye temperature of 783 K of Ca6Ba(PO4)4O facilitates efficient emission. Since Ca6Ba(PO4)4O also provides efficient yellow emission of the Eu2+ dopant, we calculated and explained its electronic band structure, the partial and total density of states, effective Mulliken charges of all ions, elastic constants, Debye temperature, and vibrational spectra. Finally, we demonstrated the application of phosphor in a luminescence intensity ratio thermometry and obtained a relative sensitivity of 1.92%K-1 and a temperature resolution of 0.2 K in the range of physiological temperatures.

Sensitive and Reliable Fluorescent Thermometer Based on a Red-Emitting Li2MgHfO4:Mn4+ Phosphor.

Contactless fluorescent thermometers are rapidly gaining popularity due to their sensitivity and flexibility. However, the development of sensitive and reliable non-rare-earth-containing fluorescent thermometers remains a significant challenge. Here, a new rare-earth-free, red-emitting phosphor, Li2MgHfO4:Mn4+, was developed for temperature sensing. An experimental analysis combined with density functional theory and crystal field calculations reveals that the sensitive temperature-dependent luminescence arises from nonradiative transitions induced by lattice vibration. Li2MgHfO4:Mn4+ also exhibits reliable recovery performance after 100 heating-cooling cycles due to the elimination of surface defects, which is rare but vital for practical application. This study puts forward a new design strategy for fluorescent thermometers and sheds light on the fundamental structure-property relationships that guide sensitive temperature-dependent luminescence. These considerations are crucial for developing next-generation fluorescence-based thermometers.

Site Occupancies, Electron-Vibration Interaction and Energy Transfer of CaMgSi2 O6 : Eu2+ , Mn2+ Phosphors for Potential Temperature-Sensing and Anti-counterfeiting Applications.

Eu2+ -, Mn2+ - and Eu2+ -Mn2+ -doped CaMgSi2 O6 phosphors have been prepared by a high-temperature solid-state reaction. Systematic investigation of the concentration- and temperature-dependent luminescence of Mn2+ showed that Mn2+ ions occupy two distinct sites in CaMgSi2 O6 . Electron-vibration interaction (EVI) analyses of Mn2+ ions revealed Huang-Rhys factors of 4.73 and 2.82 as well as effective phonon energies of 313 and 383 cm-1 for the two sites. Eu2+ -Mn2+ energy transfer is also discussed, and its efficiency is estimated by lifetime and luminescence spectra. The different thermal quenching behaviours of Eu2+ and Mn2+ , the distinct emission colours of Eu2+ (blue, band peak at ∼451 nm) and Mn2+ (yellow-red range, band peaks at ∼583 and 693 nm) endow the co-doped samples with potential applications in luminescence thermometry and temperature-/excitation wavelength-responsive dual anti-counterfeiting.

Influence of Isostatic Pressure on the Elastic and Electronic Properties of K2SiF6:Mn4.

Isostatic pressure effects on the elastic and electronic properties of non-doped and Mn4+-doped K2SiF6 (KSF) have been investigated by first-principles calculations within density functional theory (DFT). Bulk modulus was obtained by the Murnaghan's equation of states (EOS) using the relationship between volume and pressures at pressures between 0 and 40 GPa, and elastic constants were calculated by the stress-strain relationship giving small distortions at each pressure point. The other elastic parameters such as shear modulus, sound velocity and Debye temperature, which can be obtained from the elastic constants, were also estimated. The influence of external isostatic pressure on the electronic properties, such as crystal field strength 10Dq and emission energy of 2E → 4A2 transition (Eem), of KSF:Mn4+ was also studied. The results suggest that 10Dq and Eem linearly increase and decrease, respectively, with increasing pressure.

First-Principles Study of Optical Absorption Energies, Ligand Field and Spin-Hamiltonian Parameters of Cr3+ Ions in Emeralds.

Herein, we study the electronic structure, energies, and vibronic structure of optical d-d transitions of Cr3+ ions doped in beryl (Be3Si6Al2O18:Cr3+, emerald). A computational protocol is developed that combines periodic density functional theory (for modeling of the bulk crystalline lattice of emerald) and the multireference configuration interaction complete active space self-consistent field method supplemented with n-electron valence second-order perturbation theory (for the calculation of the energy levels, wave functions, and spin-Hamiltonian and ligand-field parameters of the trigonal Cr3+ centers in the [CrO6]9- clusters embedded in an extended point charge field). Ligand-field parameters were extracted from mapping the effective ligand-field Hamiltonian onto the full many-particle Hamiltonian from one side and from a direct fit to energies of computed d-d transitions on the other side. These have been analyzed using ab initio ligand-field theory. The quality of the theoretical predictions is critically assessed through a detailed comparison with the available experimental data.

First Principles Calculations of Atomic and Electronic Structure of TiAl3+- and TiAl2+-Doped YAlO3.

In this paper, the density functional theory accompanied with linear combination of atomic orbitals (LCAO) method is applied to study the atomic and electronic structure of the Ti3+ and Ti2+ ions substituted for the host Al atom in orthorhombic Pbnm bulk YAlO3 crystals. The disordered crystalline structure of YAlO3 was modelled in a large supercell containing 160 atoms, allowing simulation of a substitutional dopant with a concentration of about 3%. In the case of the Ti2+-doped YAlO3, compensated F-center (oxygen vacancy with two trapped electrons) is inserted close to the Ti to make the unit cell neutral. Changes of the interatomic distances and angles between the chemical bonds in the defect-containing lattices were analyzed and quantified. The positions of various defect levels in the host band gap were determined.

Structure, luminescence of Eu2+ and Eu3+ in CaMgSi2O6 and their co-existence for the excitation-wavelength/temperature driven colour evolution.

Luminescent materials with controllable colour evolution features are demanded for the development of multi-level anti-counterfeiting technologies. Here we report the structural and luminescence properties of CaMgSi2O6:Ln (Ln = Eu2+, Eu3+, Eu2+/3+) samples in detail and reveal their excitation-wavelength/temperature driven colour evolution characteristics. By tuning either the excitation-wavelength (276, 304, 343, 394 nm) or temperature (in the 330-505 K range), the designed samples with co-existing Eu2+/Eu3+ ions can achieve diverse and controllable colour evolution from red, to pink, purple and blue. This shows their potential application in anti-counterfeiting with the help of sophisticated pattern design. In addition, the underlying mechanism of the Stokes shift of the Eu2+ emission and valence stability of both Eu2+/Eu3+ ions in CaMgSi2O6 are also studied in depth. These results are valuable for designing colour-controllable luminescent materials based on the co-existence of the Eu2+/Eu3+ ions for anti-counterfeiting applications.

Hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ transparent ceramics with tuneable persistent luminescence properties.

Co-doped hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ (0.1 ≤ x ≤ 0.5) transparent ceramics have been elaborated by full glass crystallization. The compositions with low SiO2 content (x ≤ 0.4) require fast quenching conditions to form glass, i.e. specific elaboration processes such as aerodynamic levitation coupled to laser heating, whereas the x = 0.5 glass composition can be prepared on a large scale by the classic melt-quenching method in commercial furnaces. After a single thermal treatment, the resulting SrAl2O4-based transparent ceramics show varying photoluminescence emission properties when x increases. These variations are also observable in persistent luminescence, resulting in an afterglow colour-tuning ranging from green to light blue. Afterglow excitation spectra highlight the possible activation in the visible range of the obtained persistent luminescence. Indeed, persistent luminescence of hexagonal Sr0.75Al1.5Si0.5O4:Eu2+,Dy3+ large transparent ceramics has been successfully charged using a typical smartphone low power white light source. Moreover, thermoluminescence glow curves of samples containing different Dy3+ doping concentrations are studied to gain insights regarding the traps' origin and depth. Coupling thermoluminescence results together with luminescence thermal quenching and band gap calculations appear useful to understand the charge trapping and detrapping evolution with the material composition. Varying the Si-content in hexagonal Sr1-x/2Al2-xSixO4:Eu2+,Dy3+ compounds appears as a promising strategy to obtain transparent materials with tuneable green to light blue persistent luminescence.

Pushing the Limit of Boltzmann Distribution in Cr3+-Doped CaHfO3 for Cryogenic Thermometry.

Luminescence Boltzmann thermometry is one of the most reliable techniques used to locally probe temperature in a contactless mode. However, to date, there is no report on cryogenic thermometers based on the highly sensitive and reliable Boltzmann-based 4T2 → 4A2/2E → 4A2 emission ratio of Cr3+. On the basis of structural information of the local HfO6 octahedral site we demonstrated the potential of the CaHfO3:Cr3+ system by combining deep theoretical and experimental investigation. The material exhibits simultaneous emission from both the 2E and 4T2 excited states, following the Boltzmann law in a cryogenic temperature range of 40-150 K. The promising thermometric performance corroborates the potential of CaHfO3:Cr3+ as a Boltzmann cryothermometer, being characterized by a high relative sensitivity (∼ 2%·K-1 at 40 K) and exceptional thermal resolution (0.045-0.77 K in the 40-150 K range). Moreover, by exploiting the flexibility of the 4T2-2E energy gap controlled by the crystal field of the local octahedral site, the design proposed herein could be expanded to develop new Cr3+-doped cryogenic thermometers.

Ultrabroadband red luminescence of Mn4+ in MgAl2O4 peaking at 651 nm.

Blue light pumped red luminescence with broadband and high photon-energy emission is highly desired for phosphor-converted white light-emitting diodes (pc-wLEDs), to achieve a high color rendering index and high luminous efficacy. Mn4+-doped red-emitting phosphors generally exhibit sharp vibronic emissions associated with the parity- and spin-forbidden 2Eg→4A2g transitions. In this paper, two abnormal luminescence behaviors were observed for Mn4+ in the MgAl2O4:Mn4+ spinel phosphor with a short wavelength emission band peaking at 651 nm. Firstly, the Mn4+ 2Eg→4A2g transition exhibits ultrabroadband luminescence in MgAl2O4 and the large full-width at half-maximum (FWHM) is dependent both on the calcination temperature and on the partial substitution of Al3+ with Ga3+. Secondly, the thermal quenching behavior of the Mn4+ 2Eg→4A2g luminescence in MgAl2O4 shows a dependence on its thermal treatment and preparation method. The Rietveld refinement and Raman results demonstrate that the variation in the FWHM of the luminescence spectra is a sum effect of structural ordering (i.e., isotropic displacement decrease of constituent atoms) and the Mg ↔ Al anti-site disorder. A model for the observed varying thermal quenching of luminescence was tentatively proposed. The intrinsic thermal quenching temperature of Mn4+ luminescence in MgAl2O4 was found to be 390-400 K using the samples prepared by the co-precipitation and molten salt methods. The present work gives a novel perspective to understand the luminescence spectra of Mn4+ 2Eg→4A2g transition.

Chromium(III)-Doped Fluoride Phosphors with Broadband Infrared Emission for Light-Emitting Diodes.

Two types of infrared fluoride phosphors, Cr3+-doped K3AlF6 and K3GaF6, were developed in this research. The K3Al1-xF6:xCr3+ and K3Ga1-yF6:yCr3+ fluoride phosphors were proven to be pure phase via X-ray diffraction refinement, which demonstrated that the procedure can be applied to large-scale production. Electron paramagnetic resonance measurements indicated that Cr3+ ions in cubic with respect to noncubic are coupled better with K3GaF6 than with K3AlF6. The main differences between these two phosphors, the site symmetry and pressure behavior of the spectra, were obtained in temperature- and pressure-dependent spectra. According to the calculation results, Cr3+ in fluorine coordination at ambient pressure indicates an intermediate crystal field. For the phosphor-converted light-emitting diodes (LEDs) fabricated from these two phosphors, the spectral range is from 650 to 1000 nm, which resulted in a radiant flux of 7-8 mW with an input power of 1.05 W. The research reveals detailed luminous properties, which will lead to a new way of studying Cr3+-doped fluoride phosphors and their application in LEDs.

Intense deep-red zero phonon line emission of Mn4+ in double perovskite La4Ti3O12.

Phosphors that emit in the deep-red spectral region are critical for plant cultivation light-emitting diodes. Herein, ultrabroadband deep-red luminescence of Mn4+ in La4Ti3O12 was studied, which showed intense zero phonon line emission. The double-perovskite structural La4Ti3O12 simultaneously contains two Ti4+ sites forming slightly- and highly-distorted TiO6 octahedra, respectively. The influence of octahedral distortion on the Mn4+ emission energy in the two distinct Ti4+ sites was studied both experimentally and theoretically. The spectral measurements indicated that Mn4+ in La4Ti3O12 showed intense zero phonon line emission (ZPL) at deep-red 710-740 nm under excitation of 400 nm charging the O2-→ Mn4+ charge transfer transition. The splitting of the ZPL of the Mn4+ 2Eg→4A2g transition as well as the intensity of ZPL relative to the vibronic phonon sideband emissions were found to be greatly influenced by the degree of octahedral distortion. The crystal-field strength and Racah parameters of Mn4+ in each Ti4+ site were also estimated. The Mn4+ 2Eg→4A2g luminescence exhibited severe thermal quenching, which was explained by the low-lying 4T2g level and charge-transfer state.

Ratiometric Luminescent Thermometers with a Customized Phase-Transition-Driven Fingerprint in Perovskite Oxides.

The development of noncontact thermometers with self-control to specific temperatures to be used as control markers with an additional degree of reliability is a challenge in the field of thermal sensors. Herein, a strategy exploiting the wide tunability of an intrinsic feature of oxide perovskites such as the phase-transition temperature to design a new class of ratiometric luminescent thermometers is introduced. The structural and optical response to the thermal stimuli of LaGaO3:Nd3+ system is used as a prototype to show the unprecedented opportunity to combine the processes of two different regimes in the same compound, leading to a reliable optical thermal sensor with an intrinsic tell-tale sign at specific temperatures. High relative sensitivity, low temperature uncertainty, and good reproducibility, together with the need for a single calibration curve irrespective of the phase-transition temperature and the doping effects, attest the goodness of the thermometric performances. This work demonstrates the control of the phase-transition (orthorhombic ↔ rhombohedral) temperature, Tc, of lanthanum gallate in the 400-700 K range by carefully doping the perovskite structure, as a proof of concept for the design of customized thermometers characterized by a spectral shape change acting as a self-fingerprint for the Tc.